GNU sharutils, version 4.1.9

A set of shell archiver utilities

Edition 4.1.9, 28 October

Table of Contents

• Introduction to both programs
• Invoking the shar program
  • Selecting files
  • Splitting output
  • Controlling the shar headers
  • Selecting how files are stocked
  • Protecting against transmission errors
  • Producing different kinds of shars
• Invoking the unshar program
• Miscellaneous considerations

Copyright (C) 1994 Free Software Foundation, Inc.

Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice are preserved on all copies.

Permission is granted to copy and distribute modified versions of this manual under the conditions for verbatim copying, provided that the entire resulting derived work is distributed under the terms of a permission notice identical to this one.

Permission is granted to copy and distribute translations of this manual into another language, under the above conditions for modified versions, except that this permission notice may be stated in a translation approved by the Foundation.

Introduction to both programs

GNU shar makes so-called shell archives out of many files, preparing them for transmission by electronic mail services. A shell archive is a collection of files that can be unpacked by /bin/sh. A wide range of features provide extensive flexibility in manufacturing shars and in specifying shar smartness. For example, shar may compress files, uuencode binary files, split long files and construct multi-part mailings, ensure correct unsharing order, and provide simplistic checksums. See section Invoking the shar program.

GNU unshar scans a set of mail messages looking for the start of shell archives. It will automatically strip off the mail headers and other introductory text. The archive bodies are then unpacked by a copy of the shell. unshar may also process files containing concatenated shell archives. See section Invoking the unshar program.

GNU shar has a long history. All along this long road, numerous users contributed various improvements. The file `THANKS', from the GNU shar distribution, contain all names still having valid email addresses, as far as we know.

Please help me getting the history straight, for the following information is approximative. James Gosling wrote the public domain shar 1.x. William Davidsen rewrote it as shar 2.x. Warren Tucker brought modifications and called it shar 3.x. Richard Gumpertz maintained it until 1990. Pinard, from the public domain shar 3.49, made GNU shar 4.x, in 1994. Some modules and other code sections were freely borrowed from other GNU distributions, bringing this shar under the terms of the GNU General Public License.

Your feedback helps us to make a better and more portable product. Mail suggestions and bug reports (including documentation errors) for these programs to `bug-gnu-utils@prep.ai.mit.edu'.

Invoking the shar program

The format of the shar command is one of:

shar [ option ] ... file ...
shar -S [ option ] ...

In the first form, the file list is given as command arguments. In the second form, the file list is read from standard input. The resulting archive is sent to standard output unless the -o option is given.

Options can be given in any order. Some options depend on each other: the -o option is required if the -l or -L option is used. The -n option is required if the -a option is used. Also see -V below.

Some options are special purpose:

--help

Print a help summary on standard output, then immediately exits.

--version

Print the version number of the program on standard output, then immediately exits.

-q

--quiet

Verbose off at shar time. Messages are usually issued on standard error to let the user follow the progress, while making the archives. This option inhibits these messages.

Selecting files

-p

--intermix-type

Allow positional parameter options. The options -M, -B, -T, -z and -Z may be embedded, and files to the right of the option will be processed in the specified mode. Without the -p option, embedded options would be interpreted as file names. See section Selecting how files are stocked for more information on these options.

-S

--stdin-file-list

Read list of files to be packed from the standard input rather than from the command line. Input must be one file name per line. This switch is especially useful when the command line will not hold the list of files to be packed. For example:

find . -type f -print | shar -S -o /tmp/big.shar

If -p is specified on the command line, then the options -M, -B, -T, -z and -Z may be included in the standard input (on a line separate from file names). The maximum number of lines of standard input, file names and options, may not exceed 1024.

Splitting output

-o prefix

--output-prefix=prefix

Save the archive to files `prefix.01' through `prefix.nnn' instead of standard output. This option must be used when the -l or the -L switches are used. When prefix contains any `%' character, prefix is then interpreted as a sprintf format, which should be able to display a single decimal number. When prefix does not contain such a `%' character, the string `.%02d' is internally appended.

-l size

--whole-size-limit=size

Limit the output file size to size times 1024 bytes but don't split input files. This allows the recipient of the shell archives to unpack them in any order.

-L size

--split-size-limit=size

Limit output file size to size times 1024 bytes and split files if necessary. The archives created with this option must be unpacked in the correct order. If the recipient of the shell archives wants to put all of them in a single folder, she shall save them in the correct order for unshar, used with option -e, to unpack them all at once. See section Invoking the unshar program. For people used to saving all the shell archives into a single mail folder, care must be taken to save them in the appropriate order. For those having the appropriate tools (like Masanobu Umeda's rmailsort package for GNU Emacs), shell archives can be saved in any order, then sorted by increasing date (or send time) before massive unpacking.

Controlling the shar headers

-n name

--archive-name=name

Name of archive to be included in the header of the shar files. Also see the -a switch further down.

-s address

--submitter=address

The -s option allows for overriding the email address for the submitter, for when the default is not appropriate. The automatically determined address looks like `username@hostname'.

-a

--net-headers

Allows automatic generation of headers:

Submitted-by: address
Archive-name: name/partnn

The name must be given with the -n switch. If name includes a `/', then `/part' isn't used. Thus `-n xyzzy' produces:

xyzzy/part01
xyzzy/part02

while `-n xyzzy/patch' produces:

xyzzy/patch01
xyzzy/patch02

and `-n xyzzy/patch01.' produces:

xyzzy/patch01.01
xyzzy/patch01.02

-c

--cut-mark

Start the shar with a cut line. A line saying `Cut here' is placed at the start of each output file.

Selecting how files are stocked

-T

--text-files

Treat all files as text, regardless of their contents.

-B

--uuencode

Treat all files as binary, use uuencode prior to packing. This increases the size of the archive. The recipient must have uudecode in order to unpack.

Use of uuencode is not appreciated by many on the net, because
people like to readily see, by mere inspection of a shell archive,
what it is about.

-M

--mixed-uuencode

Mixed mode. Automatically determine if the files are text or binary and archive correctly. Files found to be binary are uuencoded prior to packing. This option is selected by default. For a file is considered to be a text file, instead of a binary file, all the following should be true simultaneously:

1. The file does not contain any ASCII control character besides BS (backspace), HT (horizontal tab), LF (new line) or FF (form feed).
2. The file does not contains a DEL (delete).
3. The file contains no character with its eighth-bit set.
4. The file, unless totally empty, terminates with a LF (newline).
5. No line in the file contains more than 200 characters. For counting purpose, lines are separated by a LF (newline).

-z

--gzip

Use gzip and uuencode on all files prior to packing. The recipient must have uudecode and gzip (used with -d) in order to unpack. Usage of -z in net shars will cause you to be flamed off the earth.

-g level

--level-for-gzip=level

When doing compression, use -level as a parameter to gzip. The -g option turns on the -z option by default. The default value is 9, that is, maximum compression.

-Z

--compress

Use compress and uuencode on all files prior to packing. The recipient must have uudecode and compress (used with -d) in order to unpack. Option -C is a synonymous for -Z, but is deprecated. Usage of -Z in net shars will cause you to be flamed off the earth.

-b bits

--bits-per-code=bits

When doing compression, use -bx as a parameter to compress. The -B option turns on the -Z option by default. The default value is 12, foreseeing the memory limitations of some compress programs on smallish systems, at unshar time.

Protecting against transmission errors

Transmission of shell archives is not always free of errors. So one should make consistency checks on the receiving site. A very simple (and unreliable) method is running the UNIX wc tool on the output file. This can report the number of characters in the file.

As one can guess this does not catch all errors. Especially changing of a character value does not change the computed check sum. To achieve this goal better method were invented and standardized. One very strong is MD5 (MD = message digests). This is standardized in RFC 1321. The produced shell scripts do not force the md5sum program to be installed on the system. This is necessary because it is not yet part of every UNIX. The program is however not necessary for producing the shell archive.

-w

--no-character-count

Do not check with `wc -c' after unpack. The default is to check.

-D

--no-md5-digest

Do not check with `md5sum' after unpack. The default is to check.

-F

--force-prefix

Prepend the prefix character to every line even if not required. This option may slightly increase the size of the archive, especially if -B or -Z is used. Normally, the prefix character is `X'. If the parameter to the -d option starts with `X', then the prefix character becomes `Y'.

-d string

--here-delimiter=string

Use string to delimit the files in the shar instead of `SHAR_EOF'. This is for those who want to personalize their shar files.

Producing different kinds of shars

-V

--vanilla-operation

This option produces vanilla shars which rely only upon the existence of echo, test and sed in the unpacking environment. The -V disables options offensive to the network cop (or brown shirt). It also changes the default from mixed mode -M to text mode -T. Warnings are produced if option -B, -z, -Z, -p or -M is specified (any of which does or might require uudecode, gzip or compress in the unpacking environment).

-P

--no-piping

In the shar file, use a temporary file to hold the file to uudecode, instead of using pipes. This option is mandatory when you know the unpacking uudecode is unwilling to merely read its standard input. Richard Marks wrote what is certainly the most (in)famous of these, for MSDOS :-). (Here is a side note from the maintainer. Why isnt't this option the default? In the past history of shar, it was decided that piping was better, surely because it is less demanding on disk space, and people seem to be happy with this. Besides, I think that the uudecode from Richard Marks, on MSDOS, is wrong in refusing to handle stdin. So far that I remember, he has the strong opinion that a program without any parameters should give its --help output. Besides that, should I say, his uuencode and uudecode programs are full-featured, one of the most complete set I ever saw. But Richard will not release his sources, he wants to stay in control.)

-x

--no-check-existing

Overwrite existing files without checking. If neither -x nor -X is specified, when unpacking itself, the shell archive will check for and not overwrite existing files (unless -c is passed as a parameter to the script when unpacking).

-X

--query-user

Interactively overwrite existing files. Use of -X produces shars which will cause problems with some unshar-style procedures, particularily when used together with vanilla mode (-V). Use this feature mainly for archives to be passed among agreeable parties. Certainly, -X is not for shell archives which are to be submitted to Usenet or other public networks. The problem is that unshar programs or procedures often feed `/bin/sh' from its standard input, thus putting `/bin/sh' and the shell archive script in competition for input lines. As an attempt to alleviate this problem, shar will try to detect if `/dev/tty' exists at the receiving site and will use it to read user replies. But this does not work in all cases, it may happen that the receiving user will have to avoid using unshar programs or procedures, and call /bin/sh directly. In vanilla mode, using `/dev/tty' is not even attempted.

-m

--no-timestamp

Avoid generating touch commands to restore the file modification dates when unpacking files from the archive. When the timestamp relationship is not preserved, some files like `configure' or `*.info' may be uselessly remade after unpacking. This is why, when this option is not used, a special effort is made to restore timestamps,

-Q

--quiet-unshar

Verbose off at unshar time. Disables the inclusion of comments to be output when the archive is unpacked.

-f

--basename

Use only the last file name component of each input file name, ignoring any prefix directories. This is sometimes useful when building a shar from several directories, or another directory. If a directory name is passed to shar, the substructure of that directory will be restored whether -f is specified or not.

Invoking the unshar program

The format of the unshar command is:

unshar [ option ] ... [ file ... ]

Each file is processed in turn, as a shell archive or a collection of shell archives. If no files are given, then standard input is processed instead.

Options:

--version

Print the version number of the program on standard output, then immediately exits.

--help

Print an help summary on standard output, then immediately exits.

-d directory

--directory=directory

Change directory to directory before unpacking any files.

-c

--overwrite

-f

--force

Passed as an option to the shar file. Many shell archive scripts (including those produced by shar 3.40 and newer) accepts a -c argument to indicate that existing files should be overwritten. The option -f is provided for a more unique interface. Many programs (such as cp and mv) use this option to trigger the very same action.

-e

--exit-0

This option exists mainly for people who collect many shell archives into a single mail folder. With this option, unshar isolates each different shell archive from the others which have been put in the same file, unpacking each in turn, from the beginning of the file towards its end. Its proper operation relies on the fact that many shar files are terminated by a `exit 0' at the beginning of a line. Option -e is internally equivalent to -E "exit 0".

-E string

--split-at=string

This option works like -e, but it allows you to specify the string that separates archives if `exit 0' isn't appropriate. For example, noticing that most `.signatures' have a `--' on a line right before them, one can sometimes use `--split-at=--' for splitting shell archives which lack the `exit 0' line at end. The signature will then be skipped altogether with the headers of the following message.

Miscellaneous considerations

Here is a place-holder for many considerations which do not fit elsewhere, while not worth a section for themselves.

Be careful that the output file(s) are not included in the inputs or shar may loop until the disk fills up. Be particularly careful when a directory is passed to shar that the output files are not in that directory (or a subdirectory of that directory).

When a directory is passed to shar, it may be scanned more than once, to conserve memory. Therefore, one should be careful to not change the directory contents while shar is running.

No attempt is made to restore the protection and modification dates for directories, even if this is done by default for files. Thus, if a directory is given to shar, the protection and modification dates of corresponding unpacked directory may not match those of the original.

Use of the -M or -B options will slow down the archive process. Use of the -z or -Z options may slow the archive process considerably.

Let us conclude by a showing a few examples of shar usage:

shar *.c > cprog.shar
shar -Q *.[ch] > cprog.shar
shar -B -l28 -oarc.sh. *.arc
shar -f /lcl/src/u*.c > u.sh

The first shows how to make a shell archive out of all C program sources. The second produces a shell archive with all `.c' and `.h' files, which unpacks silently. The third gives a shell archive of all uuencoded `.arc' files, into files `arc.sh.01' through to `arc.sh.nnn'. The last example gives a shell archive which will use only the file names at unpack time.

This document was generated on 7 November 1998 using the texi2html translator version 1.52.

• Computer Manuals at the Sternwarte Bonn
• Sternwarte Bonn Homepage
• Computer System of the Sternwarte  (only available locally)