coincor input records
input
The root file name of the input spectra.
records
The range of spectra.
The names of the spectra will be formed by appending the range
elements to the input root name.
output
This is the root file name for the corrected spectra. If no root name
is specified (specified with the null string "") then the operation
is done in place.
start_rec = 1
The starting record number to be appended to the root name of the
created spectra.
ccmode = )_.ccmode
The mode used to model the detector count rate corrections.
In the following C(obs) is the observed count rate and C(cor) is the
corrected count rate.
photo
Photoelectric photometer with discriminator mode. The count rate
correction is
C(cor) = C(obs) * exp (C(obs) * deadtime) where the parameter deadtime is the representative deadtime in seconds.
iids
IIDS correction given by
C(cor) = (-ln(1-C(obs)*deadtime)/deadtime)**power
where deadtime is a parameter related to the sweep time used to correct for coincidence losses and power is a power law coefficient.
deadtime = )_.deadtime
For the "photo" mode this parameter is the period, in seconds, during
which no counts can be registered by the detector. Note that this is
based on a per pixel basis. So if the discriminator dead period is of
order 50 nanoseconds and 2000 pixels are observed per readout, the
effective deadtime is about 10E-4 seconds. For the "iids" mode this
parameter defines the sweep time correction and has a value of 1.424E-3
seconds.
power = )_.power
The IIDS power law coefficient. The standard value is 0.975.
The input spectra are corrected for detector count rate errors. If no output root name is given then the operation is done in place. The type of correction is specified by the parameter ccmode. The available modes are for a general photomultiplier with discriminator coincidence correction, and the NOAO IIDS. The parameters for these modes are deadtime and power. The exposure time, in seconds, is a required image header parameter (keyword = EXPOSURE).
The default mode is for the NOAO IIDS. The IIDS correction includes a power law correction for a nonlinear effect in the IIDS image tube chain which is not included by the mountain reduction software at the telescope. If the spectra have been coincidence corrected at the telescope then only the nonlinear power law correction is applied.
The coincidence correction flag may take the values -1 for no correction, 0 for the IIDS correction with power = 1 (the correction applied by the mountain reduction software), 1 for the full IIDS correction, and 2 for the photomuliplier mode correction.
The following example corrects a series of IIDS spectra:
cl> coincor nite1 1-250 output=nite1cc start_rec=1
The following example corrects a series of spectra from the Lick ITS:
cl> coincor its 1-250 output=itscc start=1 ccmode=photo >>> deadtime=2.4E-4 power=1
TIME REQUIREMENTS Coincor requires approximately 1 second per spectrum of length 1024.
imred.iids package is designed for reducing NOAO IIDS spectra. HREF="noao.The imred.iids package is designed for reducing NOAO IIDS spectra..html">The imred.iids package is designed for reducing NOAO IIDS spectra.,