IRAF help page for package noao.imred.echelle, program ecidentify

from NOAO ecidentify -- Determine the dispersion relation in echelle spectraUSAGEPARAMETERSCURSOR KEYSDESCRIPTIONECHELLE DISPERSION FUNCTION FITTINGDATABASE RECORDSEXAMPLESSEE ALSO

ecidentify -- Determine the dispersion relation in echelle spectra


USAGE

ecidentify images


PARAMETERS

images

List of echelle format spectra in which to identify lines and fit dispersion functions.

database = database

Database in which the feature data and dispersion functions are recorded.

coordlist = onedstds$thar.dat

User coordinate list consisting of an ordered list of line coordinates. Some standard line lists are available in the directory "onedstds$".

match = 1.

The maximum difference for a match between the feature coordinate function value and a coordinate in the coordinate list. The unit of this parameter is that of the user coordinates.

maxfeatures = 100

Maximum number of the strongest features to be selected automatically from the coordinate list (function 'l') or from the image data (function 'y').

zwidth = 10.

Width of graphs, in user coordinates, when in zoom mode (function 'z').

The following parameters are used in determining feature positions.

ftype = emission

Type of features to be identified. The possibly abbreviated choices are "emission" and "absorption".

fwidth = 4.

Width in pixels of features to be identified.

cradius = 5.

The maximum distance, in pixels, allowed between a feature position and the initial estimate when defining a new feature.

threshold = 10.

In order for a feature center to be determined the range of pixel intensities around the feature must exceed this threshold.

minsep = 2.

The minimum separation, in pixels, allowed between feature positions when defining a new feature.

The following default parameters are used when fitting a function to the user coordinates. If a previous solution is read from the database then the parameters from that solution override the defaults below.

function = chebyshev

The function to be fit to the user coordinates as a function of the pixel coordinate and aperture number. The choices are bi-dimensional "chebyshev" and "legendre" polynomials.

xorder = 2

Order of the fitting function along each echelle order. The order is the number of polynomial terms; i.e. xorder = 2 is a linear function.

yorder = 2

Order of the fitting function with respect to the aperture number. The order is the number of polynomial terms; i.e. yorder = 2 is a linear function.

niterate = 0, lowreject = 3, highreject = 3.

Default number of rejection iterations and the sigma clipping thresholds. If niterate is zero then no rejection is done.

The following parameters control the graphics input and output.

graphics = stdgraph

Graphics device. The default is the standard graphics device which is generally a graphics terminal.

curosr =

Cursor input file. If a cursor file is not given then the standard graphics cursor is read.


CURSOR KEYS

           ECIDENTIFY CURSOR KEY AND COLON COMMAND SUMMARY
?  Help                   a  Affect all features     c  Center feature(s)
d  Delete feature(s)      f  Fit dispersion          g  Fit zero point shift
i  Initialize             j  Go to previous order    k  Go to next order
l  Match coordinate list  m  Mark feature            n  Next feature
o  Go to specified order  p  Pan graph               q  Quit
r  Redraw graph           s  Shift feature           t  Reset position
u  Enter user coordinate  w  Window graph            x  Crosscorrelate peaks
y  Find peaks             z  Zoom graph              .  Nearest feature
+  Next feature           -  Previous feature        I  Interrupt
:show [file]              :features [file]           :coordlist [file]
:cradius [value]          :threshold [value]         :database [file]
:ftype [type]             :fwidth [value]            :image [image]
:labels [type]            :match [value]             :maxfeatures [value]
:minsep [value]           :read [image]              :write [image]
:zwidth [value]
       ECHELLE DISPERSION FUNCTION FITTING COMMAND SUMMARY
?  Help             c  Print coordinates             d  Delete point
f  Fit dispersion   o  Fit with fixed order offset   q  Quit
r  Redraw graph     u  Undelete point                w  Window graph
x  Set ordinate     y  Set abscissa                  I  Interrupt
:show               :function [value]   :highreject [value]   :lowreject [value]
:niterate [value]   :xorder [value]     :yorder [value]

ECIDENTIFY CURSOR KEYS AND COLON COMMANDS

?

Clear the screen and print a menu of cursor and colon commands.

a

Apply next (c)enter or (d)elete operation to (a)ll features

c

(C)enter the feature nearest the cursor. Used when changing the position finding parameters or when features are defined from a previous feature list. May be used in combination with the (a)ll key.

d

(D)elete the feature nearest the cursor. (D)elete all features when preceded by the (a)ll key. This does not affect the dispersion function.

f

(F)it a function of the pixel coordinates and aperture numbers to the user coordinates. This enters an interactive function fitting package.

g

Fit a zero point shift to the user coordinates by minimizing the difference between the user and fitted coordinates. The coordinate dispersion function is not changed.

i

(I)nitialize (delete features and dispersion function fit).

j

Go to the next aperture in decreasing line number in the echelle format image. Wrap around to the last line from the first line.

k

Go to the next aperture in increasing line number in the echelle format image. Wrap around to the first line from the last line.

l

(L)ocate features in the coordinate list. A coordinate function must be defined or at least four features in more than one aperture must have user coordinates from which a coordinate function can be determined by an initial automatic function fit.

m

(M)ark a new feature using the cursor position as the initial position estimate.

n

Move the cursor or zoom to the (n)ext feature (same as +).

o

Go to a specific aperture (related to an echelle (o)rder). The user is queried for the aperture number.

p

(P)an to the original window after (z)ooming on a feature.

q

(Q)uit and continue with next image.

r

(R)edraw the graph.

s

(S)hift the fit coordinates relative to the pixel coordinates. The user specifies the desired coordinate at the position of the cursor and a zero point shift to the fit coordinates is applied. If features are defined then they are recentered and the shift is the average shift. The shift in pixels, user coordinates, and z (fractional shift) is printed. The user shift is for the fundamental order and the shift for each order is then given by this shift divided by the order number.

t

Reset the current feature to the position of the cursor. The feature is not recentered. This is used to mark an arbitrary position.

u

Enter a new (u)ser coordinate for the current feature. When (m)arking a new feature the user coordinate is also requested.

w

(W)indow the graph. A window prompt is given and a number of windowing options may be given. For more help type '?' to the window prompt or see help under gtools.

x

Crosscorrelate features with the data peaks and reregister. This is generally used with a feature list from a different image. The mean shift in user coordinates, mean shift in pixels, and the fractional shift in user coordinates is printed. The user shift is scaled to the fundamental order.

y

Up to maxfeatures emission peaks are found automatically (in order of peak intensity) and, if a dispersion solution is defined, the peaks are identified from the coordinate list.

z

(Z)oom on the feature nearest the cursor. The width of the zoom window is determined by the parameter zwidth.

.

Move the cursor or zoom window to the feature nearest the cursor.

4 +

Move the cursor or zoom window to the (n)ext feature. This does not automatically move to the next aperture.

4 -

Move the cursor or zoom window to the previous feature. This does not automatically move to the next aperture.

I

Interrupt the task immediately. The database is not updated.

Parameters are shown or set with the following "colon commands", which may be abbreviated. To show the value of a parameter type the parameter name alone and to set a new value follow the parameter name by the value.

:show file

Show the values of all the parameters. If a file name is given then the output is appended to that file. If no file is given then the terminal is cleared and the output is sent to the terminal.

:features file

Print the feature list and the fit rms. If a file name is given then the output is appended to that file. If no file is given then the terminal is cleared and the output is sent to the terminal.

:coordlist file

Set or show the coordinate list file.

:cradius value

Set or show the centering radius in pixels.

:threshold value

Set or show the detection threshold for centering.

:database name

Set or show the database for recording feature records.

:ftype value

Set or show the feature type (emission or absorption).

:fwidth value

Set or show the feature width in pixels.

:image imagename

Set a new image or show the current image.

:labels value

Set or show the feature label type (none, index, pixel, or user).

:match value

Set or show the coordinate list matching distance.

:maxfeatures value

Set or show the maximum number of features automatically found.

:minsep value

Set or show the minimum separation allowed between features.

:read name

Read a record from the database. The record name defaults to the image name.

:threshold value

Set or show the centering threshold.

:write name

Write a record to the database. The record name defaults to the image name.

:zwidth value

Set or show the zoom width in user units.

DISPERSION FUNCTION FITTING COMMANDS

?

Page help information.

c

Print input and fitted coordinates of point nearest the cursor.

d

Delete the nearest undeleted point to the cursor.

f

Fit a dispersion function including determining the order offset.

o

Fit a dispersion function with the order offset fixed. The user is queried for the order offset. This is faster than the interative fit to also determine the order.

q

Quit and return to the spectrum display.

r

Redraw the graph.

u

Undelete the nearest deleted point to the cursor (which may be outside the graph window).

w

Window the graph (type ? to the window prompt for more help).

x

Set the quantity plotted along the ordinate (x axis).

y

Set the quantity plotted along the abscissa (y axis).

I

Interrupt the task immediately. No information is saved in the database.

:function [value]

Print or set the function type (chebyshev|legendre).

:show

Print current function and orders.

:niterate [value], :lowreject [value], :highreject [value]

Print or set the iterative rejection parameters.

:xorder [value]

Print or set the order for the dispersion dependence.

:yorder [value]

Print or set the order for the echelle order dependence.


DESCRIPTION

Emission and absorption features in echelle format spectra (see apsum) are identified interactively and from a line list and a dispersion function is determined. The results of the line identifications and dispersion function are stored in a database for further reference and for use with the tasks ecreidentify and ecdispcor. Also the reference spectrum keyword REFSPEC is added to the image header. This is used by refspectra and ecdispcor.

Each spectrum in the input list is identified in turn. Initially the order in the first image line is graphed. The user may change the displayed order with the 'j', 'k', and 'o' keys. The initial feature list and dispersion function are read from the database if an entry exists. The features are marked on the graph. The image coordinates are in pixels unless a dispersion function is defined, in which case they are in user coordinate units (usually wavelength in Angstroms). The aperture number, pixel coordinate, coordinate function value, and user coordinate for the current feature are displayed on the status line.

For consistency the orders are always identified by their aperture numbers in this task and all other tasks. These are the identifications assigned when extracting the orders using the task apsum. If the user has assigned true order numbers as the aperture numbers then there is no distinction between aperture and order number. However, it is often the case that the aperture numbers are simply assigned sequentially and the true order numbers may not even be known. Initially the orders are the same as the apertures numbers but after fitting a dispersion function the true order numbers will be determined. This information is also recorded in the database and indicated in the graph titles but selecting an order to be graphed with 'o' and the status line information is always in terms of the aperture number.

The graphics cursor is used to select features and perform various functions. A menu of the keystroke options and functions is printed with the key '?'. The cursor keys and their functions are defined in the CURSOR KEYS sections and described further below. The standard cursor mode keys are also available to window and redraw the graph and to produce hardcopy "snaps".

There are two types of feature selection functions; defining new features and selecting previously defined features. The key 'm' marks a new feature nearest the cursor position. The feature position is determined by the feature centering algorithm (see help for center1d). The type of feature, emission or absorption, is set by the ftype parameter. If the new position is within a distance given by the parameter minsep of a previous feature it is considered to be the same feature and replaces the old feature (normally the position of the new feature will be exactly the same as the original feature). The coordinate list is searched for a match between the coordinate function value (when defined) and a user coordinate in the list. If a match is found it becomes the default user coordinate which the user may override. The new feature is marked on the graph and it becomes the current feature. The redefinition of a feature which is within the minimum separation may be used to set the user coordinate from the coordinate list. The key 't' allows setting the position of a feature to other than that found by the centering algorithm.

The 'y' key applies a peak finding algorithm and up to the maximum number of features (maxfeatures) are found. If there are more peaks only the strongest are kept. The peaks are then matched against the coordinate list to find user coordinate values.

To select a different feature as the current feature the keys '.', 'n', '+', and '-' are used. The '.' selects the feature nearest the cursor, the 'n' and '+' select the next feature, and the '-' selects the previous feature relative to the current feature in the feature list as ordered by pixel coordinate. These keys are useful when redefining the user coordinate with the 'u' key and when examining features in zoom mode. To change apertures (orders) the 'j', 'k', and 'o' keys are used.

If four or more features are identified spanning the range of the data (in pixel coordinates and in order number) or if a coordinate function is defined then the 'l' key may be used to identify additional features from a coordinate list. If a coordinate function is not defined the default function is fit to the user coordinates of the currently defined features. Then for each coordinate value in the coordinate list the pixel coordinate is determined and a search for a feature at that point is made. If a feature is found (based on the parameters ftype, fwidth, cradius, and threshold) its user coordinate value based on the coordinate function is determined. If the coordinate function value matches the user coordinate from the coordinate list within the error limit set by the parameter match then the new feature is entered in the feature list. Up to a maximum number of features, set by the parameter maxfeatures, may be defined in this way. A new user coordinate function is fit to all the located features. Finally, the graph is redrawn in user coordinates with the additional features found from the coordinate list marked.

The 'f' key fits a two dimensional function of the pixel coordinates and aperture number to the user coordinates. The type of function and the orders are initially set with the parameters function, xorder, and yorder. The value of the function for a particular pixel coordinate is called the function coordinate and each feature in the feature list has a function coordinate value. The fitted function also is used to convert pixel coordinates to user coordinates in the graph. Depending on the orders of the function four or more features are required covering at least two orders. A description of the dispersion function fitting is given the section ECHELLE DISPERSION FUNCTION FITTING.

If a zero point shift is desired without changing the coordinate function the user may specify the coordinate of a point in the spectrum with the 's' key from which a shift is determined. The 'g' key also determines a shift by minimizing the difference between the user coordinates and the fitted coordinates. This is used when a previously determined coordinate function is applied to a new spectrum having fewer or poorer lines and only a zero point shift can reasonably be determined. Note that the zero point shift is in user coordinates for the fundamental order. The shift for any particular order is then the zero point shift divided by the order number.

Features may be delete with the key 'd'. All features are deleted when the 'a' key immediately precedes the delete key. Deleting the features does not delete the coordinate function. To delete both the features and the dispersion function the initialize key 'i' is used. Note features deleted during dispersion function fitting also are removed from the feature list upon exiting the fitting package.

It is common to transfer the feature identifications and coordinate function from one image to another. When a new image without a database entry is examined, such as when going to the next image in the input list or selecting a new image with the ":image" command, the current feature list and coordinate function are kept. Alternatively, a database record from a different image may be read with the ":read" command. When transfering feature identifications between images the feature coordinates will not agree exactly with the new image feature positions and several options are available to reregister the feature positions. The key 'c' centers the feature nearest the cursor using the current position as the starting point. When preceded with the 'a' key all the features are recentered (the user must refit the coordinate function if desired). As an aside, the recentering function is also useful when the parameters governing the feature centering algorithm are changed.

The (c)entering function is applicable when the shift between the current and true feature positions is small. Larger shifts may be determined automatically with the 'x' function which correlates features in the image with the feature list. The features are then recentered. A zero point shift may also be given interactively with the 's' key by using the cursor to indicate the coordinate of a point in the spectrum. If there are no features then the shift is exactly as marked by the cursor but if there are features the approximate shift is applied and then the features are recentered. The shift is then the mean shift of the features after recentering. The shift is used as a zero point offset added to the dispersion function. The shift is computed in user coordinates for the fundamental order. Shifts for each order are given by scaling of this shift.

In addition to the single keystroke commands there are commands initiated by the key ':' (colon commands). As with the keystroke commands there are a number of standard graphics features available begining with ":." (type ":.help" for these commands). The colon commands allow the task parameter values to be listed and to be reset within the task. A parameter is listed by typing its name. The colon command ":show" lists all the parameters. A parameter value is reset by typing the parameter name followed by the new value; for example ":match 10". Other colon commands display the feature list (:features), control reading and writing records to the database (:read and :write), and set the graph display format.

The feature identification process for an image is completed by typing 'q' to quit. Attempting to quit an image without explicitly recording changes in the feature database produces a warning message and an opportunity to record the information in the database. As an immediate exit the 'I' interrupt key may be used. This does not save the feature information.


ECHELLE DISPERSION FUNCTION FITTING

If a minimum of four features over at least two orders, depending on the default function orders, have been identified a dispersion function relating the user coordinates to the extracted pixel coordinate and aperture number may be fit. However, more features are preferable to determine changes in the dispersion as a function of position and order.

The form of the function fit explicitly includes the basic order number dependence of echelle spectra; namely the wavelength of a particular point along the dispersion direction in different orders varies as the reciprocal of the order number. Because of distortions, the differing extraction paths through the two dimensional image, and rotations of the spectra relative to the axis of constant dispersion (i.e. aligning the orders with the image columns or lines instead of aligning the emission and absorption features) there will be residual dependences on the extracted pixel positions and orders. These residual dependences are fit by a two dimensional polynomial of arbitrary order including cross terms. Because the basic order number dependence has been removed the orders should be relatively low. Currently the functions are bi-dimensional chebyshev and legendre polynomials though other function may be added in the future.

Since the true order number may not be known initially a linear relation between the aperture numbers and the order numbers is also determined which minimizes the residuals. This relation allows an unknown offset and possible a reversed direction of increasing order. The fitted function is then represented as:

		y = offset +/- aperture
		wavelength = f (x, y) / y

where y is the order number and x is the extracted pixel coordinate along the dispersion. If the order offset is known initially or as a result of previous the 'o' fit may be used. The dispersion minimization for the order offset is then not done. This will, therefore, be faster than using the full fit, key 'f', to also determine the order offset.

The fitting is done interactively as a submode of ecidentify with its own set of cursor commands. It is entered using the 'f' key and exited using the 'q' key. The list of commands is given the CURSOR KEY section and is available from the fitting mode with '?'. The functionality of this fitting is fairly simple; the function and orders may be changed, points may be deleted and undeleted, and the results of the fit may be displayed in various formats by selecting quantities to be plotted along either axis. Generally one changes plotting of the pixel coordinate, order number, and wavelength along the x axis and residuals or radial velocity errors along the y axis. One switches between increasing the x order and the y order while switching between plotting verses x positions and order number until the residuals have been reduced to remove all systematic trends.


DATABASE RECORDS

The database specified by the parameter database is a directory of simple text files. The text files have names beginning with 'ec' followed by the entry name, usually the name of the image. The database text files consist of a number of records. A record begins with a line starting with the keyword "begin". The rest of the line is the record identifier. Records read and written by ecidentify have "ecidentify" as the first word of the identifier. Following this is a name which may be specified following the ":read" or ":write" commands. If no name is specified then the image name is used. The lines following the record identifier contain the feature information and dispersion function coefficients.


EXAMPLES

Because this task is interactive it is difficult to provide an actual example. The following describes a typical usage on arc spectra.

cl> ecidentify arc1.ec,arc2.ec

(1)

The database is searched for an entry for arc1.ec. None is found and the first order is plotted as a function of pixel coordinate.

(2)

Using a line identification chart or vast experience one of the emission lines is identified and marked with the 'm' key. Using the cursor position a center is found by the centering algorithm. The aperture number, pixel position, wavelength (which is currently the same as the pixel position), and a prompt for the true value with the default value INDEF is printed. The true wavelength is typed in and the status line is redrawn with the information for the feature.

(3)

The orders are changed with the 'j', 'k', or 'o' key and further lines are identified with the 'm' key.

(4)

After a number of lines have been marked spanning the full range of the orders and pixel coordinates the key 'l' is typed. The program now fits a preliminary dispersion solution using the current function and function orders. Using this function it examines each line in the line list and checks to see if there is an emission line at that point. With many orders and lots of lines this may take some time. After additional lines have been identified (up to maxfeatures lines) the function is refit. Finally the current order is regraphed in user coordinates.

(5)

Again we look at some orders and see if the automatic line identifications make sense.

(6)

We next enter the dispersion function fitting mode with 'f'. A plot of the residuals vs. pixel position is drawn. Some obvious misidentifications may be deleted with the 'd' key. One way to proceed with determining the function orders is to start at the lowest orders (xorder = 2 for linear and yorder = 1 for no order dependence beyond the basic dependence). We then increase each order one at a time. The x axis is changed between order number and pixel position using the 'x' key to see the dependence on each dimension. The orders are increased until there are no systematic trends apparent. Normally the y order (for the aperture or order number dependence) is low such as 2 to 4 while the x order (for the dispersion direction) is whatever is needed to account for distortions. Also one can prune deviant points with the 'd' key. Note that the order offset derived from the aperture number is given in the title block along with the RMS. When done we exit with 'q'.

(7)

The new function fit is then evaluated for all orders and the current order is redrawn based on the new dispersion. Note also that the status line information for the current feature has both the fitted wavelength and the user identified wavelength. We can add or delete lines and iterate with the fitting until we are happy with the feature list and dispersion function.

(8)

Typing 'q' exits the graph and prints a query about saving the information in the database. We answer yes to this query. Note that information can also be saved while still in the graphics loop using ":write".

(9)

The next image in the list is then graphed but the last dispersion solution and feature list is maintained. If the shift is small for the new arc we type 'a' 'c' to recenter all the features. This does not refit the dispersion automatically so we then do 'f'. Alternatively, we could use the 's' or 'x' keys to determine a large shift and do the recentering.

(10)

Finally we can exit with 'q' or examine further images with the ":image" command.


SEE ALSO

apsum, center1d, gtools, ecreidentify, identify,


This page automatically generated from the iraf .hlp file. If you would like your local iraf package .hlp files converted into HTML please contact Dave Mills at NOAO.

dmills@noao.edu