IRAF help page for package noao.imred.ccdred, program instruments

from NOAO instruments -- Instrument specific data filesDESCRIPTIONSEE ALSO


instruments -- Instrument specific data files


DESCRIPTION

The ccdred package has been designed to accomodate many different instruments, detectors, and observatories. This is done by having instrument specific data files. Note that by instrument we mean a combination of detector, instrument, application, and observatory, so there might be several "instruments" associated with a particular CCD detector. Creating and maintaining the instrument files is generally the responsiblity of the support staff, though the user may create or copy and modify his/her own instrument/application specific files. The task setinstrument makes this information available to the user and package easily.

There are three instrument data files, all of which are optional. The package may be used without the instrument files but much of the convenience of the package, particularly with respect to using the CCD image types, will be lost. The three files are an instrument image header translation file, an initialization task which mainly sets default task parameters, and a bad pixel file identifying the cosmic bad pixels in the detector. These files are generally stored in a system data directory which is a subdirectory of the logical directory "ccddb$". Each file has a root name which identifies the instrument. .sh 1. Instrument Translation File The instrument translation file translates the parameter names used by the ccdred pacakge into instrument specific parameters and also supplies instrument specific default values. The package parameter ccdred.instrument specifies this file to the package. The task setinstrument sets this parameter, though it can be set explicitly like any other parameter. For the standard instrument translation file the root name is the instrument identification and the extension is "dat" ("*.dat" files are protected from being removed in a "stripped" system, i.e. when all nonessential files are removed). Private instrument files may be given any name desired.

The instrument translation proceeds as follows. When a package task needs a parameter for an image, for example "imagetyp", it looks in the instrument translation file. If the file is not found or none is specified then the image header keyword that is requested has the same name. If an instrument translation file is defined then the requested parameter is translated to an image header keyword, provided a translation entry is given. If no translation is given the package name is used. For example the package parameter "imagetyp" might be translated to "data-typ" (the old NOAO CCD keyword). If the parameter is not found then the default value specified in the translation file, if present, is returned. For recording parameter information in the header, such as processing flags, the translation is also used. The default value has no meaning in this case. For example, if the flag specifying that the image has been corrected by a flat field is to be set then the package parameter name "flatcor" might be translated to "ff-flag". If no translation is given then the new image header parameter is entered as "flatcor".

The format of the translation file are lines consisting of the package parameter name, followed by the image header keyword, followed by the default value. The first two fields are parameter names. The fields are separated by whitespace (blanks and tabs). String default values containing blanks must be quoted. An example is given below.

    # Sample translation file.
    exptime     itime
    darktime    itime
    imagetyp    data-typ
    subset      f1pos
    biassec     biassec    [411:431,2:573]
    datasec     datasec    [14:385,2:573]
    fixpix      bp-flag    0
    overscan    bt-flag    0
    zerocor     bi-flag    0
    darkcor     dk-flag    0
    flatcor     ff-flag    0
    fringcor    fr-flag    0 

The first comment line is ignored as are blank lines. The first two lines translate the CCD image type, and the subset parameter without default values (see ccdtypes and subsets for more information). The next two lines give the overscan bias strip section and the data section with default values for the instrument. Note that these parameters may be overridden in the task ccdproc.

The next set of translations requires further discussion. For processing flags the package assumes that the absence of a keyword means that the processing has not been done. If processing is always to be done with the CCDRED package and no processing keywords are recorded in the raw data then these parameters should be absent (unless you don't like the names used by the package). However, for compatibility with the original NOAO CCD images, which may be processed outside of IRAF and which use 0 as the no processing value, the processing flags are translated and the false values are indicated by the default values.

If there is more than one translation for the same CCDRED parameter, for example more than one exptime, then the last one is used.

In addition to the parameter name translations the translation file contains translations between the value of the image type parameter and the image types used by the package. These lines consist of the image header type string as the first field (with quotes if there are blanks) and the image type as recognized by the package. The following example will make this clearer.

	'OBJECT (0)'		object
	'DARK (1)'		dark
	'PROJECTOR FLAT (2)'	flat
	'SKY FLAT (3)'		other
	'COMPARISON LAMP (4)'	other
	'BIAS (5)'		zero
	'DOME FLAT (6)'		flat

The values of the image type strings in the header contain blanks so they are quoted. Also the case of the strings is important. Note that there are two types of flat field images and three types of object images.

The CCD image types recognized by the package are:

	zero   - zero level image such as a bias or preflash
	dark   - dark count image
	flat   - flat field image
	illum  - illumination image such as a sky image
	fringe - fringe correction image
	object - object image

There may be more than one image type that maps to the same package type. In particular other standard CCD image types, such as comparison spectra, multiple exposure, standard star, etc., should be mapped to object or other. There may also be more than one type of flat field, i.e. dome flat, sky flat, and lamp flat. For more on the CCD image types see ccdtypes.

The complete set of package parameters are given below. The package parameter names are generally the same as the standard image header keywords being adopted by NOAO.

	General Image Header and Default Parameters
    ccdmean		darktime	exptime		fixfile
    imagetyp		ncombine	biassec		subset
    title		datasec         nscanrow
	       CCDRED Processing Flags
    ccdproc		darkcor		fixpix		flatcor
    fringcor		illumcor	overscan	trim
    zerocor
	       CCDRED CCD Image Types
    dark		flat		fringe		illum
    none		object		unknown		zero

The translation mechanism described here may become more sophisticated in the future and a general IRAF system facility may be implemented eventually. For the present the translation mechanism is quite simple. .sh 2. Instrument Setup Script The task setinstrument translates an instrument ID into a CL script in the instrument directory. This script is then executed. Generally this script simply sets the task parameters for an instrument/application. However, it could do anything else the support staff desires. Below are the first few lines of a typical instrument setup script.

	ccdred.instrument = "ccddb$kpno/example.dat"
	ccdred.pixeltype = "real"
	ccdproc.fixpix = yes
	ccdproc.overscan = yes
	ccdproc.trim = yes
	ccdproc.zerocor = no
	ccdproc.darkcor = no
	ccdproc.flatcor = yes
	ccdproc.biassec = "[411:431,2:573]"
	ccdproc.datasec = "[14:385,2:573]"

The instrument parameter should always be set unless there is no translation file for the instrument. The ccdproc parameters illustrate setting the appropriate processing flags for the instrument. The overscan bias and trim data sections show an alternate method of setting these instrument specific parameters. They may be set in the setup script in which case they are given explicitly in the user parameter list for ccdproc. If the value is "image" then the parameters may be determined either through the default value in the instrument translation file, as illustrated in the previous section, or from the image header itself.

The instrument setup script for setting default task parameters may be easily created by the support person as follows. Set the package parameters using eparam or with CL statements. Setting the parameters might involve testing. When satisified with the way the package is set then the parameters may be dumped to a setup script using the task dparam. The final step is editing this script to delete unimportant and query parameters. For example,

	cl> dparam ccdred >> file.cl
	cl> dparam ccdproc >> file.cl
	cl> dparam combine >> file.cl
		...
	cl> ed file.cl
.sh 3. Instrument Bad Pixel File The bad pixel file describes the bad pixels, columns, and lines in the detector which are to be replaced by interpolation when processing the images. This file is clearly detector specific. The file consists of lines describing rectangular regions of the image. The regions are specified by four numbers giving the starting and ending columns followed by the starting and ending lines. The starting and ending points may be the same to specify a single column or line. The example below illustrates a bad pixel file.

	# RCA1 CCD untrimmed
	25 25 1 512
	108 108 1 512
	302 302 403 512
	1 512 70 70
	245 246 312 315

If there is a comment line in the file containing the word "untrimmed" then the coordinates of the bad pixel regions apply to the original CCD detector coordinates. If the image has been trimmed and the bad pixels are replaced at a later stage then this word indicates that the trim region be determined from the image header and the necessary coordinate conversion made to the original CCD pixel coordinates. Note that if a subraster readout is used the coordinates must still refer to the original CCD coordinates and not the raw, untrimmed readout image. If the word "untrimmed" does not appear then the coordinates are assumed to apply to the image directly; i.e. the trimmed coordinates if the image has been trimmed or the original coordinates if the image has not been trimmed. The standard bad pixel files should always refer to the original, untrimmed coordinates.

The first two bad pixel regions are complete bad columns (the image is 512 x 512), the next line is a partial bad column, the next line is a bad line, and the last line is a small bad region. These files are easy to create, provided you have a good image to work from and a way to measure the positions with an image or graphics display.


SEE ALSO

ccdtypes, subsets, setinstrument,


This page automatically generated from the iraf .hlp file. If you would like your local iraf package .hlp files converted into HTML please contact Dave Mills at NOAO.

dmills@noao.edu